Evidential Breath-Alcohol Analyser 7000 – Standard

The Evidential Breath-Alcohol Analyser 7000 – Standard is a handheld alcohol breath-testing device with a wide temperature and measuring range, low maintenance needs and several networking options, and it can test through either a mouthpiece or a funnel.

Key features

• Wider temperature and measuring range, with low maintenance requirements
• Tests via a mouthpiece or a funnel, fast, simple, hygienic and efficient
• Electrochemical, alcohol-specific sensor
• Default automatic sample collection once the minimum volume or predefined blowing time is reached; passive sampling or manual triggering is also possible
• Visual signal when the measuring limits are exceeded
• QVGA TFT colour display, tricolour LEDs and various signal tones for results and warning messages
• Mouthpiece or funnel mounts on either side; hygienic, individually packaged mouthpieces with a tamper-proof, non-closing air outlet, an ejector and a spacer between mouth and device housing
• Funnel is hygienic and individually packaged, with air outlets that minimise back-flow of expired air
• Measuring functions run from one button; menu navigation uses two menu buttons
• Wet gas or dry gas calibration
• Warning or switch-off after the calibration period expires (depending on configuration)
• Impact-resistant ASA/PC casing
• USB-C and Bluetooth Low Energy 5.0 interfaces; GPS optional

Technical data

• Detection basis: Electrochemical sensor, 1/4" technology, alcohol-specific
• Measurement range: Breath alcohol concentration 0 to 0.63 % BrAC (ethanol mass per minimum volume at 93 °F and 1,013 hPa)
• Start-up time: Approx. 3 seconds after switching on (depending on configuration)
• Display of test results: After approx. 3 seconds at 0.0 % BrAC; after approx. 10 seconds at 0.1 % BrAC
• Ambient operating conditions: +14 °F to +131 °F; 10 to 100 % relative humidity (non-condensing); 600 to 1,300 hPa
• Ambient conditions during storage: -4 °F to +140 °F; 15 to 75 % relative humidity (10 to 100 % relative humidity for less than 48 h); 600 to 1,300 hPa
• Display: QVGA TFT colour display, 320 x 240, 2.4"
• Memory: Stores the last 10,000 tests (software can be modified on request to offer more storage space)
• Energy supply: Alkaline version, 3 x 1.5 V primary cells (Mignon, LR06, AA); charge status shown on the display; one charge or battery change is sufficient for up to 1,500 breath tests
• Accuracy test: Recommended interval of 12 months
• Dimensions (W x H x D): 2.4 in x 6.8 in x 1.4 in
• Weight (including batteries): 10.1 oz
• Vibration and impact resistance: EN 60068-2-27, EN 60068-2-6, EN 60068-2-64
• Approvals and standards: CE mark; electromagnetic compatibility; EN 15964, NHTSA, Australian Standard, FDA conformity, depending on configuration
• IP protection class: IP 54
• Interface: USB-C
• Bluetooth: Bluetooth Low Energy 5.0
• GPS: Optional

Supplied, installed, trained and serviced across India by Dawell Lifescience, with calibration and AMC support.