Portable Multi-Gas Detector 5800

The Portable Multi-Gas Detector 5800 measures up to six gases and has a shock-resistant sensor for combustible gas, built for personal monitoring with a low cost of ownership.

Key features

• Measures up to six gases
• Shock-resistant LEL sensor
• Live data transmission and fleet management through companion software
• Robust 2-component housing with a high-resolution matrix display
• IP68 protection class
• Visual alarms: 3 red LEDs for gas alarms and 3 yellow LEDs for device alarms
• Multi-tone acoustic alarm above 90 dB at 30 cm (12 in), plus vibration alarm
• Rechargeable NiMH battery, replaceable by the user
• Data logger with an optimised compression method, giving high accuracy and large storage capacity (typically more than 90 % compression compared to the traditional adjustable-interval data logger concept)
• Ready for measurement in under 60 s after switch-on (LEL and electrochemical sensors)

Technical data

• Dimensions (W x H x D): 130 x 48 x 44 mm (5.12 x 1.89 x 1.73 in)
• Weight: typically 220 to 250 g (7.76 to 8.82 oz), depending on sensor equipment
• Housing: robust 2-component housing
• Display: matrix display with high resolution
• Temperature: -20 to +50 °C (-4 to 122 °F) for measurement and storage; -40 to +50 °C (-40 to 122 °F) for use in potentially explosive atmospheres
• Pressure: 700 to 1300 mbar for measurement; 800 to 1100 mbar for use in potentially explosive atmospheres
• Relative humidity: 10 to 95 % r.h.; 5 to 95 % r.h. short term
• Protection class: IP68
• Visual alarms: 3 red LEDs (gas alarms), 3 yellow LEDs (device alarm)
• Acoustic alarm: multi-tone, above 90 dB at 30 cm (12 in)
• Energy supply: NiMH battery, rechargeable, replaceable by user
• Wireless: Bluetooth 5.0 (disabled in some countries outside the EU and outside North America, but can be retrofitted)
• Operating time: more than 12 h with the shock-resistant LEL sensor and PID sensor (Bluetooth active); typically 100 h with electrochemical sensors only
• Charging time: less than 4 h
• Ready for measurement: less than 60 s after switch-on (LEL and electrochemical sensors)
• ATEX marking: I M1 Ex da ia I Ma; II 1G Ex da ia IIC T4 Ga (usable in Ex-Zone 0)
• IECEx marking: Ex da ia I Ma; Ex da ia IIC T4 Ga (usable in Ex-Zone 0)
• cCSAus (USA and Canada): Class I, Zone 0, AEx da ia IIC T4/T3 Ga; Class I, Div 1, Groups A, B, C, D; Class II, Div 1, Gr. E, F, G
• EAC: availability on request
• Directives: 2014/34/EU (ATEX), 2014/53/EU (RED), 2011/65/EU (RoHS)
• Manufacturer's warranty: 4 years for the device (electronics and housing); 5 years for selected CO, H2S and O2 sensors; 3 years for the LEL sensor; 2 years for selected O2 sensor; 1 year for the power supply (accumulator)

Supplied, installed, trained and serviced across India by Dawell Lifescience, with calibration and AMC support.