Professional Breath-Alcohol Tester 6000

The Professional Breath-Alcohol Tester 6000 is a small, user-friendly portable alcohol screening device that lets professional users perform a breath alcohol test with speed and precision, using measuring technology proven worldwide and sold over 1,000,000 times.

Key features

• Electrochemical, alcohol-specific sensor in 1/4" technology
• Automatic sampling as standard when the minimum volume or defined blow time is reached; passive sampling without a mouthpiece or manual initiation of sampling is also possible
• Ready for use approx. 2 s after switching on, with the result displayed after approx. 3 s (at 0 mg/l, room temperature)
• Graphic backlit LCD display with a 2-colour LED and an audible signal to support result display and warning messages
• Datalogger stores the last 500 tests with test numbers, date and time
• Improved Slide'n'click mouthpiece attachment that can be fitted for right or left orientation
• Hygienic, individually packaged mouthpiece with a tamper-proof air outlet, mouthpiece ejector and a spacer between mouth and instrument housing
• Measurement functions run from just one button; menu navigation uses two menu buttons
• Direct menu-guided configuration of instrument settings (PIN required), with no additional PC software needed
• Internal clock gives a warning or deactivates the device after the end of the service interval
• Impact-resistant ABS/PC housing
• Optional Bluetooth for communication with a mobile printer

Technical data

• Measuring principle: Electrochemical sensor in 1/4" technology; alcohol specific
• Measuring range: 0 to 0.525 %BAC; a message is displayed if the measurement range limit is exceeded
• Sampling: Standard automatic sampling at minimum volume or defined blow time; passive sampling without mouthpiece or manual initiation possible
• Ready for use: Approx. 2 s after switching on
• Display of measurement result: After approx. 3 s (at 0 mg/l, room temperature)
• Operating temperature: -5 to +50 °C / 23 to 122 °F
• Relative humidity: 10 to 100 % (non-condensing and in operating state)
• Ambient pressure: 600 to 1,300 hPa / 17.7 to 38.4 inch Hg
• Display: Graphic backlit LCD; 32 x 22 mm / 1.3" x 0.9" (128 x 64 pixels)
• LED: 2-colour, to support display of results and warning messages
• Audible signal: Signal tone to support display messages and warnings
• Datalogger: Last 500 tests with test numbers, date and time
• Power supply: 1 x CR123A battery with charge level indicator in display; up to 1,500 breath tests with one battery
• Calibration: Wet gas or dry gas calibration
• Housing: Impact-resistant ABS/PC
• Dimensions (W x H x D): Approx. 50/60 x 141 x 31 mm / 2"/2.4" x 5.6" x 1.2"
• Weight: Approx. 150 g / 5.3 oz., including battery
• Vibration and shock: EN 60068-2-27, EN 60068-2-6, EN 60068-2-64
• Conformity: CE conform; EN 15964, NHTSA, FDA conformity, depending on configuration
• Protection type: IP54
• Bluetooth (optional): For communication with a mobile printer

Supplied, installed, trained and serviced across India by Dawell Lifescience, with calibration and AMC support.